How To Set Up The Handy

How To Set Up The Handy Hi guys and welcome back to another handy episode in today's video I'm going to be showing you how to set up configure and use the handy app it's extremely easy to do so don't forget to hit that like And subscribe button and let's get into the video Hi guys I'm UKDAZZZ as always and as I said at the start of the video I am going to be showing you how to configure setup and use the handy app so let's keep this bit nice and short and let's get into it Download Load The HandyVerse App Okay so the first thing we need to do is turn on our toy and put it into configuration mode we do that by holding down the button at the bottom until the light turns blue the next thing you need to do is open your mobile phone and go into the camera inside your handy quick start guide is two QR codes. One as you can see is for iOS users and the other is for Android click the relevant link and it will take you to your app store I'm obviously an Android user and once the play store has opened it's got the HandyVerse app what we're going to do now is click on the install button this will download and install the HandyVerse app to your mobile phone. This can take a couple of minutes to do so I'm going to jump to where we're ready to open the app so the app is installed we're going to click on the open Button this will take us to the HandyVerse welcome page where we can set up our toy. How to Configure The Handy App At the bottom of the screen we've got two options the first is I'm new to the handy and the second is I'm an advanced user as we're setting it up for the first time we're going to click on I'm new to the handy we can keep on clicking the continue button in the bottom right hand side of the screen until it takes us to the configuration page. Once there we need to click on the next button then we'll have to click on the allow button which lets the HandyVerse use our device's location we'll now be taken back to the configuration page we need to make sure that our toy is still switched on and we're in the configuration mode of our toy. Now click on the next button on the app we're now going to need to click on the connect button to set up our Wi-Fi it'll do a quick search and once it's finished it will take us to a page where it says add Wi-Fi network to the handy click on that button once clicked it will bring up a list of Wi-Fi's select yours and enter in the password not forgetting to click on the connect button. Once you're done once it's finished it will say in the top left hand side that is connected via Bluetooth and your Wi-Fi credentials have been saved underneath where it says connection key you'll be given a code this code will allow you to connect to other users but more importantly at this stage of setting our toy up we need to copy this code because later in the video we're going to need to update the firmware and it's this code that will let us do that/ Now we could click on the Finish button here our toy is connected and we could unplug it but what I want to do is test the connection and we do that by clicking on the continue button when I was setting the toy up for the first time I wasn't following along with the instructions on the screen so the next step is really important keeping the app open you need to take the power cable out of the toilet and plug it back in this will reset the toy. Now what you're going to need to do is push on the bottom button once quickly this will turn the light purple and put it into connect mode now all that's left to do is click on the test connection button now that